Need help?Do you have a question about the Electrolux EWF 1020 and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | EWF 1020 |
| Category | Washer |
| Language | English |
Safety advice for setting up the appliance.
Safety advice for operating the machine.
Essential safety precautions for all users.
Precautions to protect children around the appliance.
Guidelines for disposing of packaging responsibly.
How to dispose of the appliance at its end of life.
Step-by-step guide to remove transit packaging.
Advice on placing the machine on a suitable surface.
How to connect the water supply hose.
Instructions for setting up the water drain hose.
Guidance on connecting the appliance to the power supply.
Identification and explanation of the washing machine's components.
Explanation of the door lock status light.
Information on the detergent and softener compartments.
Explanation of the control panel layout and buttons.
Explanation of additional wash cycle options available.
How to set a delayed start for wash programmes.
Understanding the information shown on the machine's display.
Explains error codes and how to interpret them.
How to start, pause, and resume programmes.
How the progress of a wash cycle is shown.
Using the rinse cycle for hand-washed items.
How to drain water from the machine.
Using the spin cycle for drying laundry.
Specific spin cycle for delicate fabrics.
Short programme for lightly soiled items.
How to cancel a programme or switch off the machine.
Programmes for cotton and synthetic fabrics.
Programmes for specific delicate fabric care.
Descriptions of special programmes like Rinses, Drain, Spin.
How to clean the exterior and door seal.
Procedures for cleaning the detergent drawer.
Steps for checking and cleaning the drain pump.
How to manually drain water from the machine.
How to protect the machine from freezing temperatures.
How to check and clean the water inlet filter.
Reasons and fixes if the machine fails to start.
Causes and solutions for water filling issues.
Troubleshooting for rapid fill/empty cycles.
Problems related to draining or spinning.
Identifying and fixing water leaks from the machine.
Causes for poor washing performance.
Addressing issues with excessive vibration or noise.
Reasons why the door might be stuck.
Problems with the spin cycle not working correctly.
Explaining low water visibility due to economical design.
Explaining normal operational noises.
To Next Page