installation electrolux 35
Electrical connection
This machine is designed to operate on
a 220-230 V, single-phase, 50 Hz
supply.
Check that your domestic electrical
installation can take the maximum load
required (2.2 kW), also taking into
account any other appliances in use.
Connect the machine to an earthed
socket.
The manufacturer declines any
responsibility for damage or injury
through failure to comply with the above
safety precaution. Should the appliance
power supply cable need to be
replaced, this must be carried out by our
Service Centre.
Please ensure that when the appliance is
installed the power supply cable is easily
accessible.
132980730.qxd 19/09/2007 11.54 Pagina 35
To Next Page
Loading...
