Electrolux Frigidaire GHWQ083WC1 - Eco (Energy Saver) Mode Operation; Child Lock Feature Activation; Filter Check Reminder

12 OPERATING INSTRUCTIONS
ECO (ENERGY SAVER) MODE:
The unit is factory set to run in eco (energy
saver) mode. We recommend leaving the
unit in eco mode to help save energy and
money. However, if you would like to switch
out of eco mode, touch the button until
another mode is selected.
In eco mode, the fan will continue to run for
3 minute after the compressor shuts o. The
fan then cycles on for 120 seconds at 10
minute intervals until the room temperature
is above the set temperature, at which time
the compressor turns back on.
YOU WILL SEE:
DO THIS:
PRESS MODE
BUTTON
CHOOSE ECO
NOTE:
Please note, that if the unit is changed to
'cool' or 'fan' mode then shut o, the unit
will turn back on in eco mode. This is
mandatory per government regulations. If
the unit is changed to 'cool' or 'fan' mode
and a power failure occurs, once the power
is restored the unit will return to 'cool' or
'fan' mode.
TO ACTIVATE THE CHILD LOCK FEATURE:
DO THIS:
PRESS AND HOLD THE
“Fan Speed” & “Filter Reset” BUTTONS
SIMULTANEOUSLY FOR 3 SECONDS
Note: Press and hold the “ Fan Speed ” and “
Filter Reset ” button for 3 sec can activate or
deactvate the LOCK function. The display
will show LC for 5 secs. The control panel will
be lock and the setting can not be changed.
YOU WILL SEE:
CHECK FILTER FEATURE, YOU WILL SEE:
Note: This feature is a reminder to clean the Air
Filter (See Care and Cleaning) for more ecient
operation. The LED (light) will illuminate after
250 hours of operation. To reset after cleaning
the filter, hold the " reset filter" button 3
seconds and the light will go o.
YOU WILL SEE:
DO THIS:
HOLD RESET FILTER
BUTTON 3 SECONDS