11.3 Cleaning the lower spray
arm
We recommend to clean regularly the
lower spray arm to avoid soil to clog the
holes.
Clogged holes can cause unsatisfactory
washing results.
1. To disengage the lower spray arm,
pull it upwards in the direction
indicated by the arrow
2. Wash the spray arm under running
water. Use a thin pointed tool, e.g.
toothpick, to remove particles of soil
from the holes.
3. To engage again the spray arm, press
the spray arm downwards in the
direction indicated by the arrow.
11.4 External cleaning
• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive
cleaning pads or solvents.
11.5 Internal cleaning
• Carefully clean the appliance, including
the rubber gasket of the door, with a
soft damp cloth.
• If you regularly use short duration
programmes, these can leave deposits
of grease and limescale inside the
appliance. To prevent this, we
recommend to run long duration
programmes at least 2 times per
month.
• To maintain the performance of your
appliance at its best, we recommend
to use monthly a specific cleaning
product for dishwashers. Follow
carefully the instructions on the
packaging of the product.
ENGLISH
17
To Next Page
Loading...
