Settings Values Description
Water hardness From level 1 to lev‐
el 10 (default: 5)
Adjust the level of the water softener ac‐
cording to the water hardness in your
area.
1)
Rinse aid level From level 0 to lev‐
el 6 (default: 4)
Adjust the level of the rinse aid according
to the necessary dosage.
1)
End sound ON
OFF (default)
Activate or deactivate the acoustic signal
for the end of a programme.
1)
Auto door open ON (default)
OFF
Activate or deactivate AirDry.
1)
Key tones ON (default)
OFF
Activate or deactivate the sound of the
buttons when pressed.
Latest prog. selec‐
tion
ON
OFF (default)
Enable or disable the automatic selection
of the most recently used programme and
options.
1)
Display on floor ON (default)
OFF
Activate or deactivate TimeBeam.
1)
Brightness From level 0 to lev‐
el 9
Adjust the brightness of the display.
Language List of languages
(default: English)
Set the preferred language.
Reset settings YES
NO
Reset the appliance to the factory settings.
PNC number Number Check the PNC number of your appli‐
ance.
1)
1)
For more details, refer to the information provided in this chapter.
6.1 Setting mode
How to navigate in setting
mode
You can navigate in setting mode using
MY TIME selection bar.
A. Previous button
B. OK button
C. Next button
Use Previous and Next to switch
between the basic settings and to
change their value.
Use OK to enter the selected setting and
to confirm changing its value.
How to enter setting mode
You can enter setting mode before
starting a programme. You cannot enter
setting mode while the programme is
running.
ENGLISH 11
To Next Page
Loading...
