Electrolux Pump Espresso EES250 - Page 20

Electrolux Pump Espresso EES250 Operating Insruction
ENGLISH
19
4. Rotating the jug roundly and slowly.
5. Once the froth has been obtained, turn the selector back to "off". (Figure 9)
WARNING: Steam is very hot. Be careful.
6. Press the steam button again; then the steam ready indicator will light off, and
the coffee temperature indicator starts ashing. When the coffee temperature
indicator is always light on, the machine has come back to stand-by.
NOTE: Please also refer to page 20- Trouble shooting at the same time.
●
Programming espresso volume by yourself
Users can decide espresso volume of single-cup or double-cup by using
the programming function so that users can decide how strong they like
their coffee taste.
■Step by step
1. Make sure the appliance is ready to make coffee. (Referring to C. Making
Espresso point 1 and 2 listed above)
2. Keep pressing single-cup or double-cup button for at least 3
seconds till the appliance produces a beep sound. Then, it starts making
coffee.
3. When the volume of coffee is enough, press single-cup or double-cup
button again, then the appliance produces a beep sound. Then, the appliance
stops producing coffee and automatically memorizes the volumes into its
program.
4. If users want to over write the previous settings, users just need to repeat
above steps. New settings will be memorized into the program.