8 9
Open the ne dust container lid and
tap gently to empty dust when required.
replaced when required.
Remove the Pre-motor lter from the
ne dust container.
Cleaning the pre-motor fine dust filter to protect the motor
Cleaning fine dust container and cyclone cone
please do not
attempt to
remove cyclone
cone.
Cleaning the AeroPro Silent Air Technology nozzle*
Always disconnect the nozzle before cleaning it !
Open brush roll cover by pushing the latches. This will
free the front wheels for cleaning.
Pull out the brush roll and remove entangled threads by
snipping them away with scissors. Use the hose handle
If the wheels are stuck, remove them carefully by using
a small screwdriver.
Cleaning the AeroPro motorized nozzle*
*Only applies to certain models
To Next Page
Loading...
Need help?
General
