PROFESSIONAL LAUNDRY
Compass Control
W4130S W4180S
14/30 20/45
130/4.6 180/6.4
595 / 23 7/16 650 / 25 9/16
776 742
200 200
7.5/9.7 12.7
x x
x x
34 34
165+9 / 43.5+2.4 237+11 / 62.6+2.9
0.1 0.15
Clarus Control
Washer extractors
W4130S, W4180S
Main options
• Automatic liquid detergent supply (optional I/O board for Compass Control)
• Stainless steel front panel
• Stainless steel side panel (only with Clarus Control)
Features and benefits
• Frequency-controlled motor with fixed wash and extraction speeds ensures
smooth action in the wash and extraction sequence
• Good dewatering ability due to higher G-force compared with a
traditional solid mount machine
• Solid mount construction with robust frame in galvanized steel
• Available with two types of program controls:
Compass Control
with:
– Large display and one dial for easy program selection
– Language selection
– Two Quick Start buttons for frequently used wash programs
– Wash program packages optimized on Economy, Performance and Time
Clarus Control with:
– Fully programmable microprocessor
– All relevant wash parameters can be programmed
– Programming from key pad or downloading via memory card
• AWS – Automatic Weighing System:
– The machine weighs the linen and adjusts the amount of water
and energy according to the load. This leads to considerable
savings in case the machine is not fully loaded
• Extremely low water and energy consumption – see table below
• Four compartment soap box for manual dosing of powder or liquid
detergent
• Large door opening for easy loading/unloading
• Stainless and galvanized steel in all vital parts for high degree of rust
protection
• SuperBalance
TM
guarantees the correct extraction force
®
®
* Water temperature 59°F cold water and 149°F hot water.
Certified in accordance with ISO 9001 and ISO 14001 and approved IP 24D. Certified in accordance with UL/ETL standards.
Main specifications
Max. capacity kg/lb
Drum, volume litre/ft
3
diameter ø mm/inch
Extraction rpm
G-factor
Heating alternatives electricity kW
steam
non-heated
Consumption data ”WARM” * (3S03)
Total time min
Water consumption (cold+hot) litre/gallon
Energy consumption (motor) kWh
To Next Page
Need help?
General
