47 41
482/81 563/–
1.1/4.1 1.1/-
- 12
W4400H
45/100
400
920
825
350
36
x
x
Washer extractor
W4400H
Features and benefits
• High extraction force for efficient dewatering
• Clarus Control fully programmable, microprocessor
with up to 192 programs
• Large door opening for easy loading/unloading
• Low noise level, for pleasant working environment
• One frequency controlled motor
• Prepared for 9 liquid detergent signals
• Eight liquid supply connections
• Stainless and galvanized steel in all vital parts for high
degree of rust protection
• Stainless steel front panels and powder painted side
panels
• Electrical or direct steam heating
• SuperBalance
TM
guarantees the correct extraction force
Main options
• Front-mounted loading hopper (manual)
• Forward tilting
• Backward and forward tilting
• Noise/heat insulation, <70 dB(A)
• Test tap with level tube
• Dual drain valves for water/solvent recovery
• Five-compartment supply injector
• Third water valve
• Integrated Weighing System
TM
(IWS)
• Oil lubrication of bearing gaskets
* Water temperature 15°C cold water and 65°C hot water.
Certified in accordance with ISO 9001 and ISO 14001 and approved IP 24D.
Main specifications
Max. capacity kg/lb
Drum, volume litre
diameter ø mm
Extraction rpm
G-factor
Heating alternatives electricity kW
steam
hot water
Consumption data ”Normal 60°C” *
Total time min
Water consumption (cold/hot) litre
Energy consumption (motor/heating) kWh
Steam consumption kg
Electric heated Steam heated
®
To Next Page
Need help?
General
