PROFESSIONAL LAUNDRY
W4280X W4350X W4600X
28/62 35/77 60/135
280 350 600
830 920 980
805 650 630
300 220 220
- 25 40.8
x x x
x x x
** 49 ** 45 **
308/- 313/62 375/- 598/105 703/-
0.35/- 0.5/2.4 0.5/- 2.1/5.4 2.1/-
7.3 - 9.5 - 16
Washer extractors
W4280X, W4350X, W4600X
Features and benefits
• Clarus Control
®
with:
– Fully programmable microprocessor
– All relevant wash parameters can be programmed
– Programming from key pad or downloading via memory card
• Large door opening for easy loading/unloading
• Super Balance, software ensure a quick
distribution/extraction cycle with low noise/vibration level
• Frequency controlled motor
• Prepared for manual or automatic detergent supply
• Stainless steel in all vital parts for high degree of rust protection
• Stainless steel front panels and powder painted side panels
• Non-heated or direct steam heating
• Electrical heating (only W4350X, W4600X)
Main options
• Stainless steel panels
• Coin-meter (only W4280X, W4350X)
• Five compartment supply injector (only W4600X)
• Third water inlet valve (only W4600X)
Certified in accordance with ISO 9001 and ISO 14001 and approved IP 24D.
Main specifications
Rated capacity, filling factor 1:10 kg/lb
Drum, volume litre
diameter ø mm
Extraction max rpm
G-factor
Heating alternatives, 230/400V electricity kW
steam
non-heated
Consumption data ”Normal 60°C” 1:10*
Total time min
Water consumption (cold/hot) litre
Energy consumption (motor/heating) kWh
Steam consumption kg
Steam El Steam El Steam
* Water temperature 15°C cold water and 65°C hot water.
** Depending on steam pressure.
Images shown are a representation of the product only and
variations may occur.
To Next Page
