electronica EMS-i EL 400 Series User Manual

EL 400
Operational Manual
Digital Readout System
For Machine Tool
(Ball Scale Interface)

electronica EMS-i EL 400 Series Specifications

General

Frequency Response	50 Hz - 20 kHz
Impedance	8 Ohms
Tweeter Size	1 inch
Enclosure Type	Bass Reflex
Type	2-way speaker

Summary

3. Read Before Proceeding

4. Getting Started

5. Installation

5.2. Power Supply

5.3. Encoder Connections

Explains how to connect encoders to the DRO, including pinouts.

6. Setup

6.1. Setup Mode

6.2. Parameters Setting

Lists and explains configurable parameters for the DRO's operation.

6.3. Error compensation

Details methods for compensating linear and segmented errors for accuracy.

7. Primary functions

7.1. Absolute / Incremental mode (ABS / INC)

Explains how to switch between absolute and incremental display modes.

7.3. Axis Reset

Covers how to zero individual axes or redefine datum in ABS mode.

7.7. Setting of reference

Details setting machine zero points and recalling datum positions.

8. Secondary Functions

8.4. Center Of Circle

8.5. Center Of Line

9. Machine Specific Functions

9.1. Milling Machine Specific Functions

Details functions specific to milling operations.

9.2. Lathe Machine Specific Functions

10. Auxiliary Functions

10.1. Touch Probe Functions

11. Troubleshooting

11.1. Self Diagnostics Mode

11.2. Troubleshooting Guidelines

Provides a list of common problems and their recommended solutions.