ELEHEAR Beyond Hearing Aids utilize the microphone to capture
environmental sounds, which are then converted into electrical signals.
These signals are transmitted to a digital chip within the hearing aids,
where they undergo advanced processing, including filtering and
amplification. The result is a clear and amplified electrical
representation of the external sound. This processed signal is then
delivered to the receiver (speaker) located in the earpiece, where it is
converted back into acoustic sound waves. These sound waves travel
through the middle ear to the inner ear, where they are detected by the
auditory nerve and transmitted to the brain for sound perception.
PRINCIPLES OF HEARING AIDS
The primary components of hearing aids include the main unit (housing
the microphone and battery), receiver, ear domes, and charging case.
HEARING AIDS STRUCTURAL COMPONENTS
Empirical fitting, for hearing compensation in patients with air-conduct-
ed hearing loss.
HEARING AIDS SCOPE OF APPLICATION
03
To Next Page
Loading...