ELEKTRA ETOG-56T User Manual

ETOR-55 sensor should be installed in the vicinity
of gutters or roof channels, possibly close to
downpipes. The optimal position of the sensor
is the southern side of the building.
ETOR-55 sensor should be positioned in the area
protected by heating cables. It is necessary for
the sensor to operate in the horizontal position.
ETOR-55 should be installed so it cannot be
moved, e.g. hooking the control wire to a gutter
grip or an additional flat bar.
13

ELEKTRA ETOG-56T Specifications

General

Brand	ELEKTRA
Model	ETOG-56T
Category	Accessories
Language	English