EasyManua.ls Logo

ELEKTRA Micro Casa a Leva S1 - Precautions; Surface Stability and Lever Operation; Boiler Plug;Safety Release Valve Handling; Boiler Refilling Safety

ELEKTRA Micro Casa a Leva S1
12 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Precautions
Place machine on a suitable surface – which should be firm and
low enough to allow easy operation of the pump lever. When you
are pulling it down, your elbow should be above the lever at all
times to give best control.
The boiler plug/safety release valve – which should be firmly
screwed into the top of the boiler before the machine is switched
on. This device incorporates a pressure release valve (pressure
stat) to regulate the boiler pressure. It should only be tightened by
hand, as over-tightening can damage the valve. Turn the plug
clockwise to tighten.
The boiler plug, safety release valve.
Turn clockwise to tighten.
When refilling the boiler, make sure all pressure has been
released before removing the boiler plug.
Other precautions are shown elsewhere, indicated with an
exclamation symbol.
Precaution symbol
Training manual – Micro casa a leva
10

Related product manuals