To Next Page
B
Brian BrownAug 4, 2025
What to do if my Elektro Maschinen Water Pump does not run?
- KKathleen MackAug 4, 2025
If your Elektro Maschinen Water Pump isn't running, start by checking the cables, plug, outlet, and mains fuse to ensure they're working. Also, verify that the mains voltage isn't too low; use extension cables with the correct lead cross-section as specified in the technical specifications. Another potential cause is the motor overheating, which may trip the motor protection relay. If this happens, identify what caused the overheating, such as pumping fluid that's too hot or a pump blocked by foreign objects. After the pump cools down, it should switch back on. Finally, check that the float switch is working correctly and has enough water supply, and can move freely.
General