Elgar 400 Series User Manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra

Elgar 400 Series Specifications

General

Input Frequency	47-63 Hz
Cooling	Forced air
Output Frequency	45Hz to 1 kHz
Frequency Range	45 Hz to 1 kHz
Operating Temperature	0 to 50°C
Humidity	0 to 95% non-condensing

Summary

Elgar Two-Year Warranty

Conditions of Warranty

Details requirements for warranty claims and repair procedures.

Section I Introduction and General Description

1-9. Resistance Programming

Details how resistance programming is indicated in the model number.

1-12. Tandem Operation

Explains the procedure for connecting oscillators for tandem operation.

Section II Installation and Operation

2-6. Installation

Describes the physical process of installing the oscillator into the power source.

2-8. Operation

Details the initial operational state of the oscillator after installation.

2-10. Operation with External Sync

Explains how to synchronize the oscillator using an external signal.

2-12. Interconnections for Two or Three Phase Operation

2-15. External Signal

Section IV Maintenance

4-1. Service Information

4-3. Factory Repair

4-7. Test Points

Identifies specific test points for diagnostics and measurements.

4-10. Troubleshooting

Offers systematic methods for diagnosing and resolving operational problems.

4-15. Phase-Angle Adjustment

Section VI Repair Parts List

6-3. Spare Parts Ordering