Do you have a question about the Elgato Game Capture HD60 and is the answer not in the manual?
Interface | USB 2.0 |
---|---|
Input | HDMI |
Bitrate | Up to 40 Mbps |
Output | HDMI |
Supported Resolutions | 1080p60, 1080p30, 720p60, 720p30, 576p, 576i, 480p |
Dimensions | 112 mm x 75 mm x 19 mm |
Weight | 3.7 oz (106 g) |
System Requirements | Windows 10 (64-bit) |
Connects to game consoles or other video sources via HDMI.
Connects to an analog audio source using a 3.5mm cable.
Sends H.264 encoded video to your computer via USB 2.0.
Sends the HDMI signal in real time to a TV or display.
Captures gameplay at 1080p resolution and 60 frames per second.
Detailed setup instructions for connecting to a PlayStation 4.
Instructions for setting up the device with a Wii U console.
Overview of the video capture functionality in the software.
Explains the feature allowing retroactive recording.
Using Stream Command for directing live performances.
Instructions for live streaming to Twitch.
Instructions for live streaming to YouTube.
Guidance on using the live commentary feature.
Configuration guide for game and chat audio on PS4.
Configuration guide for game and chat audio on Xbox One.
Solves issues where video is on TV but not in software.
Solves issues where video is in software but not on TV.
Troubleshoots cases where no video is displayed.
Solves audio issues: present in software, absent on TV.
Solves audio issues: present on TV, absent in software.
Troubleshoots cases where no audio is heard.
Resolves the 'No capture devices found' status message.
Information and solutions for Error Code 43.