7 8
Connect an external USB-C power supply (not included) to the port on the right.
A minimum of 100 watts power output and PD (Power Delivery) 3.0 are required.
Connect your computer or tablet to the second-right port.
Your device will be charged via Power Delivery while exchanging data with the hub through a single cable.
Only use the supplied cable. A USB 3.2 connection is needed for the hub to work reliably.
Please note that of the 100 watts delivered via the power supply, 65 watts are available for Power Delivery,
while the rest is distributed to the USB ports.
Installation
To Next Page
Loading...
