Need help?Do you have a question about the elho V-Twin 750 Series and is the answer not in the manual?
General| Brand | elho |
|---|---|
| Model | V-Twin 750 Series |
| Category | Farm Equipment |
| Language | English |
Details the duration and conditions of the warranty for new machinery.
Outlines the steps for reporting and processing a warranty claim.
Explains ELHO's responsibility for repairing or replacing defective parts.
Lists exclusions and limitations to the product warranty.
Covers specific exclusions like wear parts, transport damage, misuse, and consequential losses.
Defines assignment rights, entire warranty scope, indemnity, governing law, and dispute resolution.
Explains that machine identification data is found on the frame plate.
Emphasizes reading manual, operator capability, and suitable clothing for safe operation.
Highlights risks of hydraulic drive and stopped/blocked rotors.
Details checks like stopping engine, securing bystanders, and checking loose parts.
States maintenance and adjustments must be done with the tractor engine stopped.
Advises caution during transport, securing baskets, and reducing speed on uneven ground.
Stresses using only original parts and not modifying machine construction.
Specifies rake is for raking agricultural hay or grass into a windrow.
Discusses noise levels and recommends hearing protection during operation.
Provides guidance on safely handling heavy components during assembly and repair.
Explains the meaning of 'WARNING' and 'NOTICE' symbols used for safety.
Instructs to stop engine and remove key before removing a marked cover.
Advises stopping tractor engine before touching components due to rotating parts.
Warns against entering the danger zone around the machine.
Alerts to risk of being hit by flying objects like stones in the danger zone.
Requires stopping tractor before removing any guards.
Advises reading manual before disassembling hydraulic or accumulator circuits.
Reminds machine is hydraulic driven; take care with stopped/blocked rotors.
Informs about the correct connection of hydraulic hoses.
Illustrates the locations of various safety signs on the machine.
Provides key specs like working width, transport width, weight, and tyre pressure.
Lists available optional equipment like hydraulic pump units and valve kits.
Details original paint colours (RAL codes) for touch-ups and repairs.
Shows diagrams with dimensions and designated lifting points.
Warns of potential damage from incorrect assembly/operation; stresses careful setup.
Details connecting machine to tractor and checking hydraulic hose connections.
Guides on releasing transport hooks and safely lifting baskets into working position.
Instructs on checking tines, basket rotation, and re-tensioning bolts with a torque table.
Advises checking for transport damages and verifying machine matches order.
Specifies correct tyre pressure and steering axle alignment for tyre wear prevention.
Details steps for disconnecting the machine, including support, arms, and hoses.
Outlines steps for connecting machine to tractor, including stabilizers and hoses.
Notes potential issues with quick-release coupling compatibility and free return line.
Explains setting initial raking height, aiming for 5 cm tine clearance.
Describes how to adjust HydroBalance pressure for proper basket operation.
Details adjusting swath width using a crank and avoiding bumper interference.
Explains how working width is adjusted by folding baskets hydraulically.
Describes adjusting throwing angle by modifying spring bar length for crops.
Explains adjusting basket speed via oil flow divider for gentle raking.
Provides advice on safe working, travel speed, and troubleshooting basket blocking.
Details preparing and transporting the machine safely on public roads.
Emphasizes cleaning and following instructions, including stopping the tractor.
Provides a table of tightening torques for various bolt sizes and classes.
Advises checking and replacing bearings, and avoiding high-pressure water jets.
Explains the function of the hydraulic filter and when it might need replacement.
Details daily, 20-hour, and seasonal lubrication points with quantities.
Outlines steps to safely remove pressure from the Hydro Balance system.
Explains how to adjust the gap between tines and scraper bars.
Describes the rear light kit, its mounting, and electrical connection standards.
Explains the S-kit principle for offset swathing, including position and angles.
Lists the main components included in the VT 750 S-kit.
Details how to use the S-kit for normal and offset swathing.
Instructs on securing the S-kit for transport to prevent accidental movement.
Describes the hydraulic pump unit, its mounting, connections, and speed regulation.
Explains the holding valve kit function for individual basket use and its benefits.
Provides instructions for mounting holding valve kit components.
To Next Page