ERROR MANAGEMENT ELC CONNECTION
Error
number
Desription Solution
1 Capacitor overvoltage
Switch the unit off, wait
2 minutes and switch the
unit on again. If the error
shows up again the unit
requires a check-up at
an authorized Elinchrom
Service Centre.
4 Charge timeout
6
Voltage unstable
(Charge hold error)
18 Discharge circuit error
32 Head board type unknown
33 14 VDC error
www.elinchrom.ch/support
ELC
125 / 500
Unit
Quick Start Guide
www.elinchrom.com
Elinchrom is a registered trademark of ELINCHROM LTD, RENENS, SWITZERLAND
QSG ELC 125 / 500 - 08.2019
Av. de Longemalle 11, P. O. Box -458, CH-1020 Renens, Switzerland,
Tel. : + 41 21 637 26 77 Fax: +41 21 637 26 81 E-mail: elinchrom@elinchrom.ch
USB socket for
rmware update
Power supply
Sync socket
To Next Page
Need help?
General
