To Next PageTo Next PageWhy Elite LCD TV has no power?
First, check if you have pressed the POWER button on the remote. If the Power LED on the TV doesn't illuminate, try pressing the POWER button directly on the TV. Also, verify that the AC power cord is securely connected.
Why Elite LCD TV power is suddenly turned off?
Your Elite LCD TV might be turning off suddenly due to a few reasons. Check if the sleep timer is activated or if the power control settings are enabled. Also, ensure that nothing is blocking the TV's vents, as the unit may be overheating. Clean the vents if necessary.
Why Elite PRO-70X5FD has no picture?
If your Elite LCD TV shows no picture, start by checking if all connections to other components are correct. Make sure the correct input source is selected. Ensure that "Audio Only" is not set to "On". If you're using a laptop, confirm that its display output mode is set to external monitor. Finally, verify the resolution setting on your PC to ensure a compatible signal is being input.
Why picture quality of HD programs is poor on Elite LCD TV?
To enjoy HD images from external equipment on your Elite LCD TV, ensure you have set up an HDMI or component connection. If the program content itself isn't in HD, it won't display as such. Also, the cable/satellite set-top box may need to be configured to output HD images, and the cable/satellite broadcast may not support a signal resolution of 1080p.
What to do if remote control unit does not operate Elite PRO-70X5FD?
If the remote control isn't working with your Elite LCD TV, first, ensure the equipment to be operated by the remote control unit is set correctly by pressing TV. Check that the batteries are inserted correctly, aligning with the proper polarity (e, f). If the batteries are old, replace them with new ones. Strong or fluorescent lighting may interfere with the remote's signal. Also, check if a fluorescent light is near the remote control sensor. Finally, ensure that "RC Control Lock" is not selected in "Operation Lock Out".
What to do if Elite PRO-70X5FD LCD TV unit cannot be operated?
If your Elite LCD TV unit is not operating, it could be due to external influences like lightning or static electricity. Try turning off the TV or unplugging the AC cord, waiting 1 or 2 minutes, and then plugging it back in to restore operation.
Why picture is cut off/with sidebar screen on Elite PRO-70X5FD LCD TV?
If the picture on your Elite LCD TV is cut off or has a sidebar screen, check if the image position is correct. Also, ensure that screen mode adjustments, such as picture size, are made correctly.
What to do if there is strange color, light color, or color misalignment on Elite PRO-70X5FD?
If you're experiencing strange color, light color, or color misalignment on your Elite LCD TV, try adjusting the picture tone. Also, consider the room's brightness, as a very bright room can make the picture appear dark.
Why the ELITE ADVANTAGE LIVE cannot be displayed?
If the ELITE ADVANTAGE LIVE feature is not displaying, ensure that the ETHERNET cable is correctly connected. Also, check the settings of "Internet Setup".
Formal statement of compliance with regulatory standards.
Statement of compliance with FCC Rules.
Statement of compliance with Canadian ICES-003.
Guidelines for safely moving and handling the television set.
Instructions for cleaning and maintaining the TV cabinet.
Specific instructions for cleaning the TV's front panel.
Safety advice regarding children and flat panel displays.
Instructions and precautions for securely mounting the TV on a wall.
Safety precautions and handling instructions for 3D glasses.
A brief overview of initial setup and quick operational tips.
Step-by-step guide to attaching the TV stand securely.
Essential steps for setting up the TV for the first time.
Advice on achieving high-definition picture quality.
Explanation of the remote control's functions and operation.
Information on connecting antennas for optimal TV reception.
Guide on how to insert batteries into the remote control.
Identification of the TV's front and side panel components.
Identification of the TV's rear panel terminals and ports.
Detailed diagram and explanation of the remote control buttons.
Overview of different methods for connecting external equipment.
Steps to select and view input from external sources.
Instructions for connecting A/V sources via HDMI or DVI.
Guide for connecting older A/V equipment using composite cables.
How to connect audio systems for enhanced sound output.
Instructions for connecting a computer to the TV for display.
Basic steps for powering the TV on and off.
Guide for the first-time setup and channel tuning process.
How to select the TV's display language.
Setting country, region, and time zone for TV operation.
Selecting the appropriate TV connection type.
How to perform an automatic channel scan.
Adjusting the TV's audio volume level.
How to silence the TV's audio output.
Setting a timer for the TV to automatically turn off.
Function to pause the current video image.
Selects preset picture and audio modes for optimal viewing.
Allows direct activation of various applications.
Accesses the Netflix streaming service application.
Reduces power consumption and increases backlight lifespan.
Switches to the previously tuned channel or input.
Displays subtitle information for programs.
Changes the screen size and aspect ratio of the display.
How to navigate and use the on-screen display menus.
Lists all available menu options and their corresponding page numbers.
Adjusts the picture to your preference with various settings.
Adjusts the sound quality to your preference with various settings.
Power control settings to save energy and manage consumption.
Adjusts various system-wide settings for optimal TV performance.
Guides through initial TV setup and configuration.
Manually memorizes channels and configures broadcast reception.
Configures the TV for internet connectivity.
Selects the display language for the TV interface.
Programs and selects favorite TV channels.
Configures digital antenna settings for optimal signal strength.
Resets all settings to factory default values.
Protects settings by setting a secret number for parental controls.
Enables or disables parental control features.
Sets movie ratings to block inappropriate content.
Sets TV rating systems to filter content for children.
Sets Canadian English and French rating systems for content filtering.
Procedures to temporarily bypass V-Chip content restrictions.
Information about the supplied 3D glasses and their accessories.
Instructions for attaching nose pads to the 3D glasses.
Guide on how to recharge the 3D glasses' battery.
Steps to turn the 3D glasses power on and off.
How to switch between 2D and 3D viewing modes.
How to view 2D images when 3D glasses are worn.
Automatic detection and display of 3D image types.
Manual selection of 3D image types when auto-detection fails.
How to switch from 3D viewing back to 2D mode.
Steps to properly end a 3D viewing session.
Converts standard 2D images into 3D for viewing.
Returns to the previously selected viewing mode.
Accesses the 3D menu for adjusting settings.
Optimizing TV settings for improved 3D viewing experience.
Selects AV modes optimized for 3D viewing.
Adjusts backlight for better 3D image brightness.
Makes various settings to enhance 3D image viewing.
Automatically switches to 3D mode when a signal is detected.
Adjusts the 3D effect when converting 2D images to 3D.
Selects method for adjusting 3D still image depth.
Adjusts the 3D still image effect (depth) level.
Displays the elapsed time of 3D image viewing.
Displays 3D images for testing the 3D operation.
Prevents 3D glasses from receiving signals from other TVs.
Instructions for connecting USB storage devices for media playback.
Connects TV to a DLNA server for media access over a network.
Guides on selecting media files from connected devices.
Steps for viewing photos, music, and videos from USB devices.
Features for viewing photos, including thumbnails and slideshows.
Specifies the duration between images in a slideshow.
Selects background music to play during slideshows.
Safely disconnects USB storage devices from the TV.
Steps for viewing media from a DLNA server on the network.
Selects playback settings for video files.
Selects playback settings for music files.
Confirms registration code and manages DivX VOD content.
Configures the remote to control other AV devices.
Controls connected STB, BD/DVD, or AUDIO devices with the TV remote.
Operates HDMI-connected equipment using TV remote.
Configures Link Control settings for connected devices.
Sets remote control function for channel selection.
Listens to TV audio via connected audio equipment without optical cable.
Automatically turns on and plays HDMI source when TV is in standby.
Displays menu for controlling connected equipment operations.
Explains how to play back titles from Link Control equipment.
Accesses setup menu of connected Link Control equipment.
Switches media for recorders (HDD or DVD).
Schedules timer recordings using the TV remote.
Lists booked recordings from the connected recorder.
Selects TV sound output to an audio system.
Specifies which HDMI device to control in a chain.
Starts and stops recording programs onto connected equipment.
Guides on connecting and displaying a PC image on the TV.
Fine-tunes PC image settings like sync and fine sync.
Selects the terminal for outputting computer audio.
Lists PC resolutions compatible with the TV.
Controls the TV from a PC via RS-232C or IP connection.
Steps to connect the TV to a broadband internet connection.
Instructions for connecting via wired Ethernet.
Instructions for connecting via wireless LAN.
Configures internet connection settings and network options.
Prevents unauthorized internet access when TV is not in use.
Verifies the TV's internet connection status.
Accesses support services and product information online.
Uses an on-screen keyboard for text input.
Navigates web pages using the TV's built-in browser.
Controls browser functions and settings via the toolbar.
Manages multiple web pages open in separate tabs.
Adds the current web page to the browser's bookmarks.
Accesses saved web pages from the bookmarks list.
Rearranges or deletes saved bookmarks.
Configures browser display and security settings.
Manages security options like cookies and certificates.
Disables the Netflix application on the TV.
Disables the VUDU application on the TV.
Provides solutions for common TV operational problems.
Solves issues related to 3D image display.
Explains error codes and their possible solutions.
Procedure to clear the forgotten secret number.
Warnings about operating the TV in extreme temperatures.
Technical specifications for the LCD TV models.
Technical specifications for the wireless LAN functionality.
Details the software components and copyrights included in the product.
Information on SHARP-developed and open-source software used.
Instructions on how to obtain open-source software source code.
Lists acknowledgements for open-source software components.
Terms and conditions of the limited warranty for the product.
Details specific warranty information based on the model.
Specifies the duration of the product's warranty coverage.
Information on how to find authorized service locations.
Steps to follow when seeking service for the product.
General