Fascino e funzionalità
Made in Italy
Firmware upgrade procedure for Real trainers
o This procedure will require 2 or more phases. The tool has a progression bar to indicate the
status of each phase.
o If the procedure fails, it’s suggested to try it again. This won’t damage the trainer.
o Now the upgrade tool can be closed.
- Modification of the resistance variation speed. (optional)
This procedure lets you to change the variation speed of the brake. Procedure:
o Download the “ChangeStepMotorSpeed” tool (link).
o Unzip the files and run the program (ChangeStepMotorSpeed.exe).
o Select the variation speed. Fast to increase or Slow to keep the standard speed.
o Click the START button and wait for the end of the procedure.
o Once finished a message will appear.
o Click the OK button and then close the tool.
o Now reboot the trainer (unplug and plug the power jack) to let the new setting to activate.
For any problem, you may contact real@elite-it.com