Elko Smart ZB Thermostat 16 A - Checking the Device History

Smart ZB Thermostat 16 A
Schedule actions within boost period
When boost mode is enabled during this period, the system will temporarily stop
the scheduled actions and only perform the boost operation until the boost
duration is over.
The new action always has a higher priority than the current action. As a result,
boost mode will be activated even when the scheduled action is in progress and
the system will stop the schedule.
To view the temperature changes during the boost operation, go to Checking the
device history, page 30.
Checking the device history
Using the app, you can monitor the temperature changes by accessing the device
history.
To see the device history of the group thermostats:
1. On the Home page, tap All devices > Thermostat.
2. On the device control panel page, tap History.
3. In the History page, you can see the Temperature and Energy changes in
Day (A), Week (B), Month (C), or Year (D) view.
00:00 06:00 12:00 18:00 23:00
Time
c
0
20
B
MonthDay Week Year
9 Sep 2022
History
Temperature Energy
E
A
C
D
10
15
5
00:00 06:00 12:00 18:00 23:00
Time
kWh
0
1
B
2.5
MonthDay Week Year
KWh
9 Dec 2020
History
Temperature Energy
E
A
C
D
0.5
11:0
0
0.2KWh
NOTE: Temperature and energy tabs are available for preset P4,P5,P6,
and P8.
For preset P1,P2,P3, and P7 only temperature tab is visible and for P9
only energy tab is visible.
NOTE: You can adjust the date, week, month, or year using “◄ ►” (E).
Alternatively, navigate to Home > All devices >Smart ZB Thermostat 16 A
> History to check the device history of the individual Thermostats.
30 DUG_ZB Thermostat 16 A_ELKO-00