Elko Smart ZB Thermostat 16 A - Creating a Schedule

Smart ZB Thermostat 16 A
Creating a schedule
The heating system is fully controlled and triggered by your schedule. Once the
schedule is set, your system will follow the active schedule. You can create or
modify the schedules at any time.
To create a schedule:
1. On the Home page, tap All devices > Thermostat.
2. Tap Schedule > Add Schedule to add a schedule.
3. Set the time (A).
4. Tap Repeat (B), select the days you want to set the schedule.
5. Tap Note (C), enter the note and tap Confirm.
6. Tap the toggle switch (D) to turn on the Notification for the schedule. The
app will send a notification that the scheduled task is executed at the time of
schedule.
7. In the Thermostat section, you can adjust the temperature (E) for the
scheduled time.
8. Tap Save.
Add Schedule
Save
Once
Repeat
Note
Thermostat
Note - The Schedule works according to the timezone
where device is located.
B
C
D
E
10 42
11 43
A
Cancel
8 40
12 44
AM
PM
4 17
30
DUG_ZB Thermostat 16 A_ELKO-00 31