Smart ZB Thermostat 16 A
Resetting the device
You can manually reset the thermostat to factory settings or soft reset.
Soft reset
Press and hold the O touch button > 20 s.
The thermostat flashes “Sr”, indicating soft reset, and it is selected when the
button is released.
The ‘Sr’ will flash to confirm the soft rest.
NOTE: To cancel the soft reset, press and hold the O button for > 30 s. This
reverts the thermostat's UI back to its previous state before the touch button is
pressed, with no change in a functional state.
A soft reset will:
• Delete all Zigbee connection details.
• Delete all cloud and account details maintained by the device to allow re-
registration.
• Revert to the default setpoint in manual control.
• Maintain all Factory settings e.g. MAC address.
• Maintain the installer configuration of the device to ensure proper functioning
until and after rejoining/re-registration.
DUG_ZB Thermostat 16 A_ELKO-00 39
To Next Page
Loading...