Smart ZB Thermostat 16 A
Technical Data
Nominal voltage: AC 230 V ~, 50 Hz
Maximum current rating Resistive load: max. 16 A, 3520 W
Inductive load: max. 4 A
Standby: max 0.5 W
Connecting terminals: Screw terminals for max. 2.5 mm², 0.5 Nm
Neutral conductor: Required
Ambient temperature: 0 to 40 °C
Relative humidity: max. 90% non-condensing
Temperature accuracy: max. ±0.5 °C (accross the range of 4 to 30 °C)
Temperature measurement resolution: max. 0.1 °C
Display: 7x5 dot matrix, 3 additional LEDs
Operating frequency: 2.401 GHz to 2.483 GHz
Max. radio-frequency power transmitted: < 10 mW
Communication protocol: Zigbee 3.0 certified
Floor sensor types: 10, 12, 15, 33, 47 (Thermistor resistance values in kOhm. Nominal value
at 25 °C)
Protection Class: II
Working voltage: 230 V
Over-voltage category: III
Rated impulse voltage: 4 kV
Pollution degree: 2
CTI rating of insulation components: 175 V
Material group: IIIa (based on CTI value)
Disconnection type: 1.B
44 DUG_ZB Thermostat 16 A_ELKO-00
To Next Page
Loading...