ELMECO FCM Series User Manual

2
PROBLEM SOLVING GUIDE ELMECO SLUSH MACHINE MODEL FCM
A01 – Instructions on how to read references
All the parts in this manual are identified by their position on the machine’s exploded view:
pos. XX. In the parts list the exploded view position is linked with the corresponding part
number. Each Problem is identified with the number: PXX and contains description of the
potential Couse as well as Remedy to the Problem. You will also find references to the
necessary tools: AXX, required for the repair.
A05 – Recommended Maintenance Tools
Brush
13 mm alan wrench key
10 mm alan wrench key
8 mm alan wrench key
7 mm alan wrench key
Small slotted tip screwdriver
Large slotted tip screwdriver
Small Phillips screwdriver
Large Phillips screwdriver
Small Phillips stubby screwdriver
1.5 mm hex key
Hammer
Plyers
Cutting nippers
5 mm hex key
Electrical Tester
Electrician's scissors
Wire Trimmers
Refractometer

ELMECO FCM Series Specifications

General

Brand	ELMECO
Model	FCM Series
Category	Kitchen Appliances
Language	English