ELMECO FCM Series User Manual

Name: ELMECO FCM Series
Brand: ELMECO
Rating: 4 (1 reviews)

33 pages

To Next Page

To Previous Page

PROBLEM SOLVING GUIDE ELMECO SLUSH MACHINE MODEL FCM

A20 – Important information on functionality of the FCM

control board

FCM offers series of auto diagnostic alarms. They are displayed on the controller’s screen. If

screen blinks ON & OFF, press and hold it in order to see what type of alarm is on.

Table of Contents1
A01 - Instructions on How to Read References2
A10 - Features and Technical Specifications3
A15 - Recommended Preventive Maintenance Spare Parts Kit3
A20 - Important Information on Functionality of the Fcm Control Board4
P01 - Machine Does Not Freeze and Red Light Located Near the Main Power Switch (Pos.72) Is on5
The Screen Is On; High Pressure Red Light Remains off - Pos.72)7
P03 - in SLUSH Mode Machine Does Not Freeze and Solenoid Light Does Not Come on on the Control Board's Screen; in COLD/DEFROST Mode Machine Works Properly9
P04 - Control Board's Screen Is Blinking; When Menu Button Pressed and Released, "Alarm Motor" Comes on the Screen; Mixing Augers Turn10
P05 - Control Board's Screen Is Blinking; When Menu Button Pressed and Released, "Alarm Motor" Comes on the Screen; Mixing Augers Do Not Turn12
P06 - One Tank over Freezes, Other One Does Not Freeze at All13
P07 - Machine over Freezes in Cold/Defrost Mode14
P08 - Machine Does Not Freeze; Product Inside All Tanks Remain at Ambient Temperature; Red Light Located Near the Main Power Switch (Pos.72) Is off15
P09 - Control Board's Screen Blinks. When Menu Button Pressed and Released "Alarm Voltage" Come on the Screen17
P10 - All Control Boards Remain Off; Mixing Augers Do Not Turn; Lights Inside the Tank Lids Remain Off. Only Compressor and Condenser Fan Motor Work18
P11 - Control Board's Screen Is Blinking. after Pressing and Releasing Menu Button "Alarm Thermal" Comes on the Screen19
P12 - Control Board's Screen Is Blinking. after Pressing and Releasing Menu Button "Alarm Level" Comes on the Screen. Machine Works Properly21
P13 - Machine Does Not Freeze; Mixing Augers Do Not Turn, Lights in the Tanks' Lids Remain off22
P14 - Control Board Does Not Come on24
P16 - Mixing Augers Do Not Turn; Machine Does Not Freeze25
P17 - Horizontal Mixing Auger "Skips", Making Loud Noise27
P18 - Laud Squeaking Noise Comes from the Inside of the Tank, When Mixing Augers Are Turning29
P19 - Product Leaks from Underneath the Tank into a Drip Tray30
P20 - Product Drips from the Dispensing Spout While It Is in a Closed Position32
P21 - in Slush, Cold & Defrost Modes Machine over Freezes or Does Not Freeze at All33

Questions and Answers:

Need help?

Do you have a question about the ELMECO FCM Series and is the answer not in the manual?

ELMECO FCM Series Specifications

General

Brand	ELMECO
Model	FCM Series
Category	Kitchen Appliances
Language	English

Related product manuals

ELMECO FCM Series User Manual

Table of Contents

Questions and Answers:

ELMECO FCM Series Specifications

Related product manuals