Handles and controls are hot! Use the tool provided or a fire glove to operate
dampers and doors. Do not touch with bare hands – severe burns could result.
Repeated or extended over-firing of this stove is dangerous and will void the warranty.
This stove is designed to be connected to a 6” flue / chimney system.
The thermometer on the stove door has been calibrated for approximate oven temperatures.
Use the interior oven thermometer provided for accurate readings.
FIREVIEW STOVES
are listed to ULC Standards S-627 &
UL 1482 by Warnock Hersey
Professional Services Ltd.
3372-22
INSTALLATION & OPERATING
INSTRUCTIONS FOR FIREVIEW
™
WOOD-BURNING COOKSTOVES
Important! Read this entire manual
before you install or use your new
cookstove. To reduce the risk of fire,
follow the installation instructions.
Failure to follow the instructions may
result in property damage, bodily
injury or even death.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
MODELS
1840 &1842
CONTACT LOCAL BUILDING DEPARTMENT AND FIRE AUTHORITIES
REGARDING PERMITS REQUIRED, RESTRICTIONS AND INSTALLATION
INSPECTION REQUIREMENTS IN YOUR AREA.
MODEL 1842-G: INSTALLATION MUST CONFORM WITH LOCAL CODES
OR, IN THE ABSENCE OF LOCAL CODES, WITH
THE NATIONAL FUEL GAS CODE, ANSI Z223.1/NFPA 54.
U.S. ENVIRONMENTAL PROTECTION AGENCY
This unit is not a certified residential Wood Heater.
The primary use for this unit is for cooking or baking.
To Next Page
Need help?
General