ELNA 2000 Series User Manual

Inserting the Bobbin
1. Place the bobbin in the bobbin case. Make sure
the thread unwinds in the direction shown in the
illustration.
2. Pull the thread into the bobbin case slot.
3. Draw the thread under the tension spring and
into the delivery eye.
Pull out about 15 cm (6”) of thread.
4. Pull out the latch on the bobbin case.
Insert bobbin case. Make sure the prong fits into
the hook race.
Close bobbin cover.
14
1
2
3
4

ELNA 2000 Series Specifications

General

Drop Feed	Yes
Free Arm	Yes
Adjustable Stitch Length	Yes
Adjustable Stitch Width	Yes
Stitch Options	Decorative
Presser Feet	Buttonhole Foot, Zipper Foot