UM600183 Rev. A, page 7 of 38
User Manual – I-series 2.0
Power
The first time the DC power is connected to the system, the system will automatically turn on.
Press and hold power button when the system is on to bring up the Power Off option popup.
In the event that the system freezes and does not respond, press and hold the power button until the system turns off. If the system does not turn
off via the power button, the system will need to be powered down by unplugging the power cord from the wall.
The Elo Backpack power button is equipped with an LED that indicates the power status of the system, as follows:
OFF (disconnected from wall)
For detailed power consumption specifications, refer to technical specifications available on the Elo website www.elotouch.com.
To bring the system out of sleep/standby mode, press the power button once. If the system is in sleep mode, touching the external screen (if using
an Elo Touch monitor) will wake up the system,
If long periods of non-use are planned, turn off and unplug your Elo Backpack to save power.
The operating voltage, frequency and current for the system is provided in the power ratings table below:
Operating Frequency Range
To Next Page
Loading...