To Next PageTo Next Page
Need help?Do you have a question about the Elpumps VBP 25/1300 INOX and is the answer not in the manual?
General| Power | 1300 W |
|---|---|
| Max Head | 130 m |
| Material | Stainless Steel (INOX) |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Inlet/Outlet | 1 inch |
| Pump Housing Material | Stainless Steel |
| Cable Length | 10 m |
| Max Liquid Temperature | 35 °C |
| Inlet/Outlet Diameter | 1 inch |
| Max. Flow Rate | 25 l/min |
Advises on user age, supervision, and safe operation of the apparatus for various user capabilities.
Information regarding the product's environmental considerations during use and its proper disposal.
Explains the meaning and importance of danger and attention symbols used in the manual.
Outlines critical safety rules for connecting the apparatus to the mains and protective measures.
Details safe practices for operation, maintenance, cable handling, and extension cord usage.
Specifies that the apparatus is intended solely for household and domestic purposes.
Lists essential checks to perform before starting the pump, including cable integrity and safe lifting.
Alerts users to the risk of scalding if the pump operates with no liquid flow for extended periods.
Describes the COELBO Switchmatic 1 T-kit for automatic operation and digital pressure gauge.
Lists various uses for the pump, including domestic water supply, garden irrigation, and well water lifting.
Defines the types of clean, non-corrosive liquids that the pump is designed to handle.
Lists materials like inflammable liquids, sewage, and chemicals that must not be pumped.
Advises on protecting the pump from condensation, sunlight, rainwater, and extreme temperatures.
Emphasizes the critical importance of preventing the pump from operating without water.
Details on pipe size, foot valve placement, slope, filters, and sealing for suction lines.
Guidance for installing the apparatus in shafts, including protection from subsoil water and ventilation.
Instructions for firmly fastening the pump unit to a stable surface using appropriate screws.
Steps for filling the pump and suction pipe with water and checking the system for leaks.
Explains the thermal protection relay and indicators for pump operation.
Information on setting switch-on/off pressures, recommending expert adjustment.
Guidance on checking rotation direction, avoiding dry running, and inspecting seals/fuses.
Emphasizes disconnecting power before maintenance and performing annual foot valve seal checks.
Instructions for draining the pump to prevent frost damage and for long-term storage.
Addresses problems like reduced output, impeller damage, and early pump cycling.
Identifies common faults like non-rotation, intermittent switching, and low output with solutions.
Critical safety rules for connection, operation, maintenance, and preventing misuse in pools.
Lists specific circumstances that will void the product's warranty.
Provides instructions for disposing of the device as electronic waste according to EU regulations.
Declares CE conformity and adherence to technical data and usage instructions.
