Model 2000 Flow Computer Instruction Manual
2.0 GENERAL DESCRIPTION
Model 2000 issue 21 Page No
18
2.2.24. MAIN MENU FUNCTION Board Info
This menu item when selected will display Information pages giving details of all the user fitted circuit boards:-
Slot 1
Information about Circuit Board fitted in User Slot 1.
Slot 2
Information about Circuit Board fitted in User Slot 2.
Slot 3
Information about Circuit Board fitted in User Slot 3.
Slot 4
Information about Circuit Board fitted in User Slot 4.
Slot 5
Information about Circuit Board fitted in User Slot 5.
Select the User Slot position from the above list, Information will be displayed about the Circuit Board fitted in that slot , this
will include:-
Circuit Board type For Example Input 2 Board
Circuit Board Version
Software Version
IP Address Network 2 Board Only
2.2.25. MAIN MENU FUNCTION Information
This menu item when selected will allow access to the Information pages ( 1 to 6 ) that have been set up using the Model
2000 Windows software. If no pages have been set up then this menu item will not appear. It is intended that the information
pages are used for data such as Approval Information, Calibration Information and Transmitter Information. Up to six pages
can be set up and these can contain both text and bit map information.
2.2.26. MAIN MENU FUNCTION General Info
This menu item when selected will display General Information pages giving the following information :-
Model 2000 type Gas or Liquid
Turbine, Ultrasonic or Orifice
Turbine (Density) or Ultrasonic (Density) or Orifice (Density)
Venturi Tube type 1 or 2
Station Controller
Coriolis Meter
Software version number.
Instrument serial number.
Security setting Fully Secure
Partially Secure
Not Secure
Unit programme Checksum
Data Checksum
To Next Page
Loading...