Eltax Active Subwoofer Atomic User Manual

Features
www.eltax.com
Eltax Atomic
Active subwoofer
• Active subwoofer
• Optimized for Home Theatre
• High Level In/High Level Out
• Danish design
• Available in black/beech finish
Atomic A-12.2R Atomic A-15.2R
System Bass refl ex Bass refl ex
Sinus Max power 250 watts 300 watts
Max power handling 500 watts 600 watts
Frequency range +/- 4 dB 30-170Hz 25-170Hz
Subwoofer 300mm downfi ring 375mm downfi ring
Crossover Frequency 50-170Hz adjustable by remote 50-170Hz adjustable by remote
Phase Changer Yes Yes
Volume control Adjustable by remote Adjustable by remote
Subwoofer RCA line-in Yes Yes
Speaker input terminals Left, Right binding posts Left, Right binding posts
Speaker outputs Left, Right binding posts Left, Right binding posts
Mains voltage 230-240V / 50-60Hz 230-240V / 50-60Hz
Power consumption 430 watts 500 watts
Power consumption stby. <1 watts <1 watts
On / off automatic (stby.) Yes Yes
Dimensions (HxWxD) 400 x 400 x 400mm 450 x 450 x 450mm
Accessories 1 x 2m RCA 1 x 2m RCA

Eltax Active Subwoofer Atomic Specifications

General

Brand	Eltax
Model	Active Subwoofer Atomic
Category	Subwoofer
Language	English

Summary

Atomic A-12.2R Specifications

Atomic A-15.2R Specifications

System Type

Describes the acoustic design as Bass reflex for enhanced low-frequency output.

Sinus Max Power

Specifies the continuous power output capability as 300 watts.

Max Power Handling

Indicates the peak power the subwoofer can handle is 600 watts.

Frequency Range

Defines the operational frequency response as 25-170Hz with +/- 4 dB tolerance.

Subwoofer Driver

Crossover Frequency

Sets the crossover point between 50-170Hz, adjustable via remote control.

Phase Control

Volume Control

Mains Voltage

Power Consumption

States the typical power consumption during operation is 500 watts.

Standby Power

Automatic Standby