Time Zone Select : Choose your time zone
NTP Server : Select NTP server.
Step 4. WAN Port Type Setup:
For most users, Internet access is the primary application. The ATA support the WAN interface for
Internet access and remote access. The following sections will explain more details of WAN Port Internet
access and broadband access setup. When you click “WAN Port Type Setup” from within the Wizard
Setup, the following setup page will be show.
Three methods are available for Internet Access:
Fixed IP User: If you are a leased line user with a fixed IP address, fill out the following items with
the information provided by your ISP.
WAN IP Address: check with your ISP provider
Subnet mask: check with your ISP provider
Default Gateway: check with your ISP provider
DHCP Client (Dynamic IP):
Get WAN IP Address automatically
ADSL Dial-Up User (PPPoE Enable)
To Next Page
Loading...