Information
System Information
System Status
This page shows the current status and some basic settings of the device.
Click System Information to display system status, The Device Information has WAN type, and LAN type,
Phone Status, more Status…etc.
This page displays the current information for the device. It will display the LAN、 WAN and system
firmware information. This page will display different information for you, according your WAN setting
(Static IP, DHCP, PPPoE, PPTP).
If your WAN connection is set up for Dynamic IP address, there will be a Release button and Renew
button. Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your WAN connection is set up for PPPoE, there will be a Connect button and Disconnect button. Use
"Disconnect" to drop the PPPoE connection and use "Connect" to establish the PPPoE connection
To Next Page
Loading...