NTU-RG-54xx. User manual (user)
•
•
•
•
4.4.3.3 The 'MAC Filtering' submenu. Filtering Settings for MAC Addresses
MAC filtration allows traffic to be forwarded or blocked depending on source and destination MAC addresses.
To change the mode click the 'Apply Changes' button.
Services → Firewall → MAC Filtering
Default Action– default settings:
Deny – when checked, traffic pass is prohibited by default;
Allow –when checked, traffic pass is allowed by default;
MAC Address–MAC address for which limitation/access should be imposed.
Added filters are displayed in the'Current Filter Table' located below. The 'Rule' field displays the type of
created rule ('Allow' - allowing or 'Deny' - forbidding). To delete a specific filter, select the position and click the
'Delete selected' button, to delete all filters click 'Delete All'.
To Next Page
Loading...
