BA-en-3041-2008_PC 59
4.4.2.3 Preset
Press the "Preset" button.
Screen for loading, saving, editing and deleting preset parameter sets for
a quick adjustment of values to the respective operation.
The left part of the screen shows the current preset parameters, the right
side the editing options.
Load
The selected parameter (e.g. "Preset_0001") is loaded into the parameter
set of the generator when the "Load" button is pressed.
New
The current parameter set is saved in the list of preset parameters under
the name to be entered.
Change
Press "Change" for editing the selected parameter. You can change all
parameters and the file name.
Delete
Press to delete the selected parameter. Pressing the "Delete" button
removes the entry from the list of preset parameters.
Fig. 41:
Overview of
preset parameters
B00350
To Next Page
Loading...
