60 BA-en-3041-2008_PC
4.4.2.4 Eltex DEBUG overview / Message overview
Press the "Eltex DEBUG" button.
View of current error and warning messages
Pressing the "Error history" button will open a chronological list of all mes-
sages. Click on an entry to see additional information on the cause of the
message and the remedy.
Pressing the "Acknowledge" button prompts an internal check; if the check
is successful, the message is deleted from the list.
If there are messages that cannot be acknowledged, the generator must
be restarted to rectify the error; press the "Restart device" button. Note
that "diagnostic messages" cannot be acknowledged and deleted with this
function. In this case, the device must be switched off, then on again.
Fig. 42:
Overview
Eltex DEBUG
B00351
Fig. 43:
DEGUG
Overview
B00352
To Next Page
Loading...
