208 SBC session border controllers
Outdated OIDs
Some OID have been changed and in future releases old branches may be removed or replaced by new
assignments. It is recommended to reconfigure monitoring systems and scripts to use the new OIDs.
Table D.6 — Outdated OID
1.3.6.1.4.1.35265.1.49.17
Changed on smgCpuLoadTable
(1.3.6.1.4.1.35265.1.49.37)
1.3.6.1.4.1.35265.1.49.17.1.x
(1.3.6.1.4.1.35265.1.49.37.1.2.x)
1.3.6.1.4.1.35265.1.49.17.2.x
(1.3.6.1.4.1.35265.1.49.37.1.3.x)
1.3.6.1.4.1.35265.1.49.17.3.x
(1.3.6.1.4.1.35265.1.49.37.1.4.x)
1.3.6.1.4.1.35265.1.49.17.4.x
(1.3.6.1.4.1.35265.1.49.37.1.5.x)
1.3.6.1.4.1.35265.1.49.17.5.x
(1.3.6.1.4.1.35265.1.49.37.1.6.x)
1.3.6.1.4.1.35265.1.49.17.6.x
(1.3.6.1.4.1.35265.1.49.37.1.7.x)
1.3.6.1.4.1.35265.1.49.17.7.x
Changed on cpuSirq
(1.3.6.1.4.1.35265.1.49.37.1.8.x)
1.3.6.1.4.1.35265.1.49.17.8.x
(1.3.6.1.4.1.35265.1.49.37.1.9.x)
Support for OID MIB-2 (1.3.6.1.2.1)
SMG supports the following MIB-2 branches:
– system (1.3.6.1.2.1.1) — general information on the system;
– interfaces (1.3.6.1.2.1.2) — information on network interfaces;
– snmp (1.3.6.1.2.1.11) — information on SNMP operation.