ELTEX SMG-4 - Page 150

150 SMG digital gateway
delete prefix
<IDX Prefix>
Remove the specified prefix
exit
Return from this configuration
submenu to an upper level
history
Show the history of entered commands
prefix
Enter the prefix configuration mode
quit
Terminate this CLI session
set active
0-15
Define the number of active numbering
schedules
set domain
<IDX>
<DOMAIN>
0-15
String, 15 characters
max.
Specify a domain for registration
set name
<IDX>
<NAME>
0-15
String, 15 characters
max.
Define a numbering schedule name
show active count
Show the number of active numbering
schedules
show active list
Show the list of active numbering
schedules
show list
Show the list of numbering schedules
show prefixes
<IDX>
0-15
no/yes
Show numbering schedule prefixes
with the specified number
4.3.14.1 Prefix Configuration Mode
To enter this mode, execute the prefix <PREFIX_INDEX> command in the configuration mode, where
<PREFIX_INDEX> is a prefix number.
SMG4-[CONFIG]-[NUMPLAN]> prefix 0
Entering Prefix-mode.
SMG4-[CONFIG]-[NUMPLAN]-PREFIX[0]>
Command
Parameter
Value
Action
?
Show the list of available commands
access category
<CAT_IDX>
0-31
Define an access category for the line
group
access check
<ON_OFF>
on/off
Check / do not check the access
category
called npi
<PFX_CLD_NPI>
transit/
unknown/
isdn/
telephony/
national/
private
Modify callee number type (transit—
keep unchanged)
called type
<PFX_CLD_TYPE>
unknown/
subscriber/
national/
international/
specific_net/
transit
Callee number type modification
(transit—keep unchanged).
Subscriber number—used for local calls
and incoming long-distance calls. At
that, the transmitted number should
be as follows: abxxxxx, or bxxxxx, or
xxxxx.
National number—used in outgoing
long-distance calls or in local calls and