ELTEX TAU-36.IP - Page 173

________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-72.IP/TAU-36.IP 173
9 show voiceport status 1
11 show voiceport configuration 1
12 show voiceprofile 1
13 show voiceprofile 1q
16 disable
17 show hw
18 show switch
25 show call active
26 show call history
27 enable
28 show proc
30 show history
enable
The command is intended for enter the privilege mode.
Syntax.
enable
Parameters
Command contains no arguments.
Privilegy
none
Command mode
EXEC
Example
tau-72> enable
tau-72#
disable
The command is intended for exit the privilege mode.
Syntax.
disable
Parameters
Command contains no arguments.
Privilegy
priv
Command mode
EXEC
Example
tau-72# disable
tau-72>