_________________________________________________________________________________
Universal Network Terminal TAU-72.IP/TAU-36.IP 225
4. Press <ENTER>. The following text will appear on screen:
**************************
* TAU-72 FXS Gateway *
**************************
fxs72 login:
Enter 'admin', password is not required.
5. To reset settings in the protected mode, execute the following commands:
a. To reset settings in CLI mode and retain the console password, execute the following
commands:
> enable
# reset static
or if you need to set dynamic
network parameters obtaining in factory default configuration (via DHCP):
> enable
# reset dhcp
b. To reset settings in CLI mode and delete the console password, execute the following
commands:
> enable
# shell
reset2defaults static
or, if you have to define the dynamic obtaining of network settings in factory configuration
(via DHCP protocol):
> enable
# shell
reset2defaults dhcp
To Next Page
Loading...
