ELTEX TAU-36.IP - Page 291

________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-72.IP/TAU-36.IP 291
Event
Importance
Description
OID
Note
fxs72VbatAlarmTrap
MAJOR
The voltage Vbat =%1$d in beyond the permissible limits (38-
72V)
1.3.6.1.4.1.35265.3.6.1
Parameter 1: voltage
fxs72VringAlarmTrap
MAJOR
The voltage Vring %2$d=%1$d beyond the permissible limits
(100-120V)
1.3.6.1.4.1.35265.3.6.2
Parameter 1: voltage
Parameter 2: the number of
the inductor (1 or 2)
fxs72TemperatureAlarmTrap
MAJOR
The temperature of sensor %2$d=%1$d greater than the
maximum value (90°C)
1.3.6.1.4.1.35265.3.6.3
Parameter 1: The
temperature
Parameter 2: The number of
the temperature sensor (1-4)
fxs72FanAlarmTrap
MAJOR
Fan %1$d is on, but does not rotate
1.3.6.1.4.1.35265.3.6.4
Parameter 1: The number of
fan
fxs72SSwAlarmTrap
MAJOR
No registration on MGC/SSW
1.3.6.1.4.1.35265.3.6.5
It is used for software version
- Megaco
fxs72PortAlarmTrap
MINOR
Port %1$d is locked
1.3.6.1.4.1.35265.3.6.6
Parameter 1: The port
number
fxs72VbatOkTrap
CLEAR
The voltage Vbat is OK
1.3.6.1.4.1.35265.3.7.1
fxs72VringOkTrap
CLEAR
The voltage Vring %2$d is OK
1.3.6.1.4.1.35265.3.7.2
Parameter 2: the number of
the inductor (1 or 2)
fxs72TemperatureOkTrap
CLEAR
The temperature of sensor %2$d is OK
1.3.6.1.4.1.35265.3.7.3
Parameter 2: The number of
the temperature sensor (1-4)
fxs72FanOkTrap
CLEAR
Fan %1$d is operating normally
1.3.6.1.4.1.35265.3.7.4
Parameter 1: The number of
fan
fxs72SSwOkTrap
CLEAR
There is a registration on MGC/SSW
1.3.6.1.4.1.35265.3.7.5
It is used for software version
- Megaco
fxs72PortOkTrap
CLEAR
Port %1$d is unlocked
1.3.6.1.4.1.35265.3.7.6
Parameter 1: The port
number
fxs72VmodeSwitchTrap
INFO
Power supply is changed - %1$D V
1.3.6.1.4.1.35265.3.7.10
Parameter 1: new mode: 1 –
60V, 2 – 48V
fxs72FansSwitchTrap
INFO
Fan status changed
1.3.6.1.4.1.35265.3.7.11
Parameter 1: --disabled, 1-
enabled
fxs72updateFwFail
MINOR
Error while updating firmware
1.3.6.1.4.1.35265.3.6.20
1.3.6.1.4.1.35265.3.7.21
fxs72updateFwOk
INFO
Firmware is updated
1.3.6.1.4.1.35265.3.7.20
fxs72BpuAlarmTrap
CRITICAL
No connection with BPU
1.3.6.1.4.1.35265.3.6.12
fxs72BpuOkTrap
CLEAR
BPU connection restored
1.3.6.1.4.1.35265.3.7.12