EasyManuals Logo

Elvox 1282 User Manual

Elvox 1282
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22
N Parameter Min. Default Max Notes
47 1 Memory Num. 0 0 99999999
Quick call number associated with the button “
”.
0 = disabled
48 2 Memory Num. 0 0 99999999
Quick call number associated with the button “
”.
0 = disabled
49 Ext.1 Address 0 0 99999999 Address of external transponder reading device 1
50 Ext.2 Address 0 0 99999999 Address of external transponder reading device 2
51 Ext.3 Address 0 0 99999999 Address of external transponder reading device 3
52 Ext.4 Address 0 0 99999999 Address of external transponder reading device 4
53 Ext.5 Address 0 0 99999999 Address of external transponder reading device 5
54 Ext.6 Address 0 0 99999999 Address of external transponder reading device 6
55 Ext.7 Address 0 0 99999999 Address of external transponder reading device 7
56 Ext.8 Address 0 0 99999999 Address of external transponder reading device 8
57 Tx Key 0030 = does not transmit the key;
1 = transmits the key if it is in the entrance panel database
2 = transmits the key if it is not in the entrance panel database
3 = always transmits the key
58 Request Passw 0011 = requests password confirmation from the transponder reading
device
59 Tx UP / Down 0110 = transmits the key on interphone cable riser serial line (UP)
1 = transmits the key to the main entrance panel / switchboard (DOWN)
60 Hidden Paras 0 0 50 Typing 27 enables the display and programming of parameters 61 –
67
61 Mon. Off Time 0 30 1000 Monitor power-off timeout.
The programmed value is multiplied by 10ms, therefore if Mon. Off
Time = 30 then the timeout = 300ms
62 Transit Time 0 5 1000 Maximum transit time in minutes
63 Command Rep.(+) 0 388 65535 Repetition of special commands
64 Restart Time(h) 0 0 99999999 NOT USED
65 Factory reset. 0 0 99999999 Typing the code 31830988 resets the parameters to their default
values.
66 Flash sector reset 0 0 26 Erases the flash sector indicated from 1 to 26.
IMPORTANT! Improper use of this parameter can damage the en-
trance panel or cause malfunctions!
67 Number of keys from keypad 0 100 2000 Maximum number of keys insertable from keypad
If the parameter is 0, the keys from keypad are disabled.
EN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Elvox 1282 and is the answer not in the manual?

Elvox 1282 Specifications

General IconGeneral
BrandElvox
Model1282
CategoryIntercom System
LanguageEnglish

Related product manuals