Need help?Do you have a question about the elysia xpressor 500 and is the answer not in the manual?
General| Brand | elysia |
|---|---|
| Model | xpressor 500 |
| Category | Music Pedal |
| Language | English |
Defines the operating point where compression begins if input level exceeds the set value.
Controls the transient response time for the compressor to reach 10 dB of gain reduction.
Manages the time for the signal to return to unity gain after falling below the threshold.
Sets the input to output level relation, allowing for negative ratios.
A low cut filter in the sidechain to prevent overcompression from low end energy.
Limits the control voltage, preventing gain reduction from exceeding a set value.
Make-up gain control to compensate for compression-induced level loss.
Blends the direct and compressed signals for parallel compression.
Shortens attack time automatically for loud signal impulses, then returns to original setting.
An alternative release curve that shortens with increased gain reduction.
Alters frequency spectrum, harmonics, and transient response for a richer sound.
Details the effect of negative ratios, where higher input signal lowers output signal.
Explains the GRL's role as a secondary threshold controller in the signal path.
Details pin assignments for balanced and unbalanced audio connections.
Describes how to connect for mono or stereo processing.
Provides frequency response, THD+N, noise floor, and impedance values.
Lists directives and norms the product complies with for European markets.
Guidelines for safe operation related to electricity and power.
Warnings about device heat and installation near heat sources.
Instructions for safe connection and mounting, avoiding excessive force.
Advice on preventing condensation damage when moving between temperatures.
Details the limited warranty period, terms, and conditions.
Contains information on copyright, disclaimers, and trademark usage.
To Next Page