Need help?Do you have a question about the EMAK K 700 H and is the answer not in the manual?
General| Fuel Type | Gasoline |
|---|---|
| Oil Capacity | 0.6 L |
| Weight | 16 kg |
| Starting System | Recoil starter |
| Cooling System | Air cooled |
Details the physical components and layout of the engine.
Lists key technical specifications, dimensions, and performance data of the engine.
Provides diagrams illustrating engine mounting points and critical installation dimensions.
Presents technical drawings showing various Power Take-Off (PTO) shaft configurations and measurements.
Illustrates the engine's electrical system, including component connections and wiring color codes.
Outlines critical safety and procedural guidelines to follow before and during engine maintenance.
Identifies the specific location on the engine where the serial number is stamped for identification.
Specifies the standard and service limit measurements for various engine parts.
Lists the correct torque values for engine fasteners to ensure secure and accurate assembly.
Presents a comprehensive schedule of recommended maintenance tasks and their required intervals.
Provides detailed instructions on engine oil selection, capacity, level checking, and safe disposal.
Explains the procedure for cleaning and maintaining the engine's air cleaner element.
Describes methods for cleaning the muffler to remove carbon deposits and ensure proper exhaust function.
Guides on inspecting, gapping, and replacing the spark plug for optimal ignition performance.
Details the process for checking and adjusting the engine's valve clearance while the engine is cold.
Explains how to adjust the carburetor's idle speed to the specified engine RPM.
Outlines the procedure to test the functionality of the oil alert system for engine protection.
Describes the steps for adjusting the engine governor to maintain stable operating speeds.
Guides on draining the fuel tank and replacing or cleaning the fuel filter.
A diagnostic guide for identifying and resolving issues that cause difficulty in starting the engine.
Addresses common causes and solutions for the engine experiencing a significant reduction in power output.
Helps diagnose and fix problems leading to inconsistent or fluctuating engine speed.
Interprets abnormal exhaust colors (black, white, blue) to diagnose engine running conditions.
Details common factors and issues that can cause the engine to stop running unexpectedly.
Provides additional causes and corrective actions for engines that frequently stall.
Covers the potential causes and troubleshooting steps for an engine that is operating at excessively high temperatures.
Assists in diagnosing engine faults by identifying and categorizing unusual noises.
Provides a systematic approach to diagnose and resolve failures within the electric starting system.
Explains the procedure for measuring cylinder compression to assess engine health.
Details the method for verifying the presence and quality of the spark at the spark plug.
Lists essential safety measures and general guidelines to observe before beginning engine disassembly.
Outlines the comprehensive process for disassembling and servicing various engine components.
Provides instructions for the disassembly and reassembly of the air cleaner and muffler assemblies.
Continues instructions for carburetor insulator and choke lever disassembly and reassembly.
Details the step-by-step process for taking apart and putting back together the engine's carburetor.
Explains the disassembly and reassembly procedures for the engine's governor control system.
Guides on the proper disassembly and reassembly of the manual recoil starter mechanism.
Covers the procedures for removing and reinstalling the engine's flywheel and ignition coil.
Details the method for adjusting the air gap between the ignition coil and flywheel for optimal spark generation.
Explains how to measure spark plug cap resistance and adjust ignition coil gap.
Outlines the process for disassembling, inspecting, and reassembling the cylinder head and valve train components.
Details the disassembly and reassembly procedures for the engine's crankcase, camshaft, and piston.
Explains the disassembly and reassembly steps for the governor components within the engine.
To Next Page
