System component description
VNX5700 Hardware Information Guide 23
Control Station front view
On the front, viewing from left to right, the Block and File (Unified) VNX5700 platform
Control Station includes the following hardware components:
◆ DVD-ROM drive
◆ USB 2.0 connector (not used)
◆ Control switch and status LEDs
Figure 12 shows the orientation of these components.
Figure 12 VNX5700 platform Control Station (front view)
1 DVD-ROM drive 3 USB 2.0 connector (not used)
2 Control Station switch and status LEDs (for
a closer view, see Figure 13 on page 24)
DVD
1
2
3
CNS-001740
To Next Page
Loading...
