60 VNX5700 Hardware Information Guide
I/O modules
Two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module LEDs
The two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module has three types of
status LEDs. Figure 52 shows the LEDs and Table 31 describes them.
Figure 52 Two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module LEDs
Activity LEDs
CNS-001665
Link LEDs
Power/fault LED
Table 31 Two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module LEDs
LED Color State Description
Power/Fault Green On I/O module is powered up.
Amber On I/O module has faulted.
— Off I/O module is powered down.
Link (each
port has one)
Green On Network connection
— Off No network connection
Activity (each
port has one)
Amber Blinking Transmit/receive activity
— Off No activity
To Next Page
Loading...
