EMC2 VNX Series Hardware Information Guide

4 EMC VNX5400 Hardware Information Guide
Related documentation
Related documentation
EMC provides the ability to create step-by-step planning, installation, and maintenance
instructions tailored to your environment. To create VNX customized documentation, go
to: https://mydocs.emc.com/VNX/.
To download a PDF copy of the desired publication, go to the following sections:
◆ For hardware-related guides, go to About VNX, then select Learn about VNX hardware.
Next, follow the steps in the wizard.
◆ For technical specifications, go to About VNX, then select View technical
specifications. Next, follow the steps in the wizard.
◆ For installation, adding, or replacing tasks, go to VNX tasks section, then select the
appropriate heading. For example, to download a PDF copy of the
VNX5400 Block
Installation Guide
, go to Install VNX, and follow the steps in the wizard.
◆ For server-related tasks, go to the VNX Server tasks section, then select the
appropriate heading. For example, to download a PDF copy of adding or replacing
server hardware, go to VNX Server tasks, and select Add or replace server hardware.
Next, follow the steps in the wizard.
Title Description
“Data Mover enclosure front
view” on page 21
Describes and illustrates the front view of a DME and the
components that comprise it.
“DPE rear view” on page 23 Describes and illustrates the rear of a DPE and the components
that comprise it.
“Control Station rear view” on
page 36
Describes and illustrates the rear view of the Control Station
used in the VNX5400.
“Data Mover enclosure rear
view” on page 41
Describes and illustrates the rear of a DME and the components
that comprise it.
“I/O modules” on page 44 Describes and illustrates the types of I/O modules supported in
the VNX5400.
“Disk-array enclosures” on
page 69
Describes and illustrates the three types of DAEs available for
the VNX5400.
“Appendix A: Cabling” on
page 124
Describes the types of DAE cabling available for the Block and
File/Unified VNX5400 platform. The cabling can be either
stacked or interleaved depending on your specific
requirements.
“Appendix B: Field lift tool and
accessory kit” on page 135
Describes the type of portable (mechanical) lift and accessory
kit used for lifting hardware components into a rack.
Table 1 Organization (continued)

EMC2 VNX Series Specifications

General

Brand	EMC2
Model	VNX Series
Category	Storage
Language	English